Tang Nano 1K

2025-02-11

Edit on 2022.08.18

Introduction

Tang Nano 1K is a core board designed based on Gowin GW1NZ-LV1 FPGA chip. The board is equipped with RGB LCD interface and onboard USG-JTAG debugger, which make it convenient for users to use. User can use this for small digital logic design and experiment.

Nano-1
Nano-2

Parameters

item Specs
chip GW1NZ-LV1 FPGA
logic units(LUT4) 1152
Register(FF) 864
Block SRAM(bits) 72K
Number of B-SRAM 4
User flash(bits) 64K
Number of Pll 1
Number of I/O Bank 2

Pinmap

pinmap

Informations

Addition

  1. If you have trouble with this board, you can join our telegram (t.me/sipeed) or contact us on twitter (https://twitter.com/SipeedIO).

  2. For Fpga burning we require using this Programmer application. Because other version Programmer application may fail burning this board.

  3. If you meet problems, please visit problems first, normally most problems will be solved after using this programmer Click me.